Francisco Molina 922b35da2d drivers/xbee: disable CTS/RTS pin unless periph_uart_hw_fc is used ...

If usinng an arduino xbee shield then CTS pin will be wired to the
ICSP connector RESET pin.

If also used on an arduino-% board then if xbee is busy sending or
receiving data it will assert CTS and this will trigger a reset on
the board.

To avoid this disable CTS functionality on start up unless hardware
flow control is explicitly requested.

2020-04-24 10:54:36 +02:00

..

include

gnrc_netif: document new *_create() out parameter as such

2020-03-26 14:37:44 +01:00

gnrc_xbee.c

gnrc_netif_xxx_create: use external netif allocation

2020-03-26 11:12:23 +01:00

Makefile

drivers: added support for Xbee modules

2015-03-24 23:19:29 +01:00

xbee.c

drivers/xbee: disable CTS/RTS pin unless periph_uart_hw_fc is used

2020-04-24 10:54:36 +02:00