`_decapsulate()` is called by callees of `_receive()` so the call to
the latter function within the first creates a recursion we don't want.
Using `gnrc_netapi` instead removes that and provides the added benefit
that other subscribers to IPv6 are also informed.
Update return values in documentation
Improve comments with separate @return statement for each rv
Remove incorrect return value for aes_init
Use @return instead of @returns
Fix comment lines over 80 chars
The current test implementation wrongly assumes that the diff between
two fired events (e1, e2) must always increase. That is not true, as
event e1 may reside on the upper part of [I/2, I) and e2 on the lower
part of [I, 2*I).
This commit fixes the test to look at the actual time that was randonmly
chosen from both intervals (t1, t2). Given that the intervals are
doubled, t1 must always be smaller than t2.
The STM32F103C8 secretly comes with 128KiB flash instead of 64KiB. Still, only
64KiB of it are tested and guaranteed to work. However, most of the times the
whole 128KiB flash works just fine. In the BluePill documentation this fact is
already documented and by using
$ make BOARD=bluepill CPU_MODEL=stm32f103cb
the whole 128 KiB can be used by RIOT. When using this hack routinely, it easier
to use environment variables instead. But allowing to overwrite CPU_MODEL via
environment variables seems to be a bad thing, as it is easy to forget to clear
that environment variable when changing the BOARD variable.
This commit introduces the new STM32F103C8_FLASH_HACK variable, which unlocks
the 128KiB FLASH when set to "1". The BluePill documentation has been updated
accordingly.
The unification of a bigger stack for the atmega platforms
makes some boards to not have enough memory to provide
the big stack plus the application code.
It is possible though, to override the stack size to a
smaller amount if running the test is necessary.
Empty array uint8_t data[] is not allowed in ISO-C++. Replacement: function coap_hdr_data_ptr, which handles
the pointer arithmetic to point where hdr.data pointed
This adds a LED_PANIC macro which defines which LED,
or combination of LEDs should notify a panic error.
This is currently used to signal BADISR_vect errors.
cpu.c and startup.c were redundant in most platforms, except for
atmega256rfr2. The common code is now in cpu/atmega_common/cpu.c
and cpu/atmega_common/startup.c. cpu_conf.h is also removed as
it's now in cpu/atmega_common/include thus shared by all atmega
based platforms.
Removes duplicated code for atmega platforms. They were all
basically the same, only with the exception of atmegarfr2,
for which there is an #if statement to use the code in the
same file.
1. When the 32 bit target of the xtimer overflowed the timer was not placed in the right list.
2. When the hardware timer overflowed the comparison was wrong for setting next target.
3. Backoff condition
Martine Lenders