Federico Pellegrin
617124792c
efm32/i2c: make sure 16-bit register access is done in big endian
2019-05-29 11:29:11 +02:00
Federico Pellegrin
1779abafb5
periph/i2c: make sure i2c registers is big-endian on all archs
2019-05-29 05:15:23 +02:00
Alexandre Abadie
f559ccb0c6
Merge pull request #11260 from maribu/nucleo-f767zi
...
boards/nucleof7*: SPI and refactoring
2019-05-21 14:01:41 +02:00
Marian Buschsieweke
ffb6c54d81
boards/nucleo-f746zg: Use shared clock settings
...
Use boards/common/stm32/include/f7/cfg_clock_216_8_1.h for core clock settings
2019-05-21 13:19:42 +02:00
Marian Buschsieweke
54b621bf3e
boards/nucleo-f722ze: Use shared clock settings
...
Use boards/common/stm32/include/f7/cfg_clock_216_8_1.h for core clock settings
2019-05-21 13:19:42 +02:00
Marian Buschsieweke
61e1068eba
boards/nucleo-f767zi: Add SPI settings
2019-05-21 13:19:42 +02:00
Francisco
96d94000f4
Merge pull request #11558 from kaspar030/pr/sock_util/make_maxlengths_configurable
...
sys/sock/util: allow overriding of SOCK_*_MAXLEN
2019-05-21 13:13:26 +02:00
Dylan Laduranty
85d37bb94f
Merge pull request #11336 from benpicco/sam0-timer
...
sam0_common: make Timer implementation common across all sam0 MCUs
2019-05-21 12:13:39 +02:00
Kaspar Schleiser
7dc1b4f45d
sys/sock/util: allow overriding of SOCK_*_MAXLEN
2019-05-21 12:06:49 +02:00
Benjamin Valentin
849dd4cdce
sam0_common: make Timer implementation common across all sam0 MCUs
...
The currently supported SAM0 MCUs (samd21, saml21, saml1x) share the same
Timer peripheral, yet each of them carries it's own copy of the Timer
driver.
This introduces a new timer driver that is common for all sam0 MCUs and
uses structs for configuration instead of defines.
2019-05-21 11:47:59 +02:00
Alexandre Abadie
7c27badfbb
Merge pull request #11441 from aabadie/board/i-nucleo-lrwan1
...
boards: add support for i-nucleo-lrwan1 (Arduino-like shield)
2019-05-21 10:51:43 +02:00
Alexandre Abadie
07a7ae9c3a
test: not enough memory for i-nucleo-lrwan1
2019-05-21 09:57:33 +02:00
Alexandre Abadie
a76efc3b93
examples: not enough memory for i-nucleo-lrwan1
2019-05-21 09:57:33 +02:00
Alexandre Abadie
5e3d20d0b2
boards: add support for i-nucleo-lrwan1
2019-05-21 09:57:33 +02:00
Alexandre Abadie
13cc513f30
cpu/stm32l0: add support for stm32l052xx
2019-05-21 09:54:35 +02:00
Alexandre Abadie
763658548b
Merge pull request #11313 from aabadie/pr/stm32/common_rtt_config
...
boards/stm32: introduce and use new common rtt configuration header
2019-05-21 09:49:01 +02:00
Alexandre Abadie
a4de4153fc
boards/lsn50: use common rtt configuration
2019-05-21 09:01:02 +02:00
Alexandre Abadie
ca9bd8e5cc
boards/nucleo-l496zg: use common rtt configuration
2019-05-21 08:38:44 +02:00
Alexandre Abadie
f92139509d
boards/nucleo-l476rg: use common rtt configuration
2019-05-21 08:38:44 +02:00
Alexandre Abadie
c3d7dbce2c
boards/nucleo-l452re: use common rtt configuration
2019-05-21 08:38:44 +02:00
Alexandre Abadie
4c86b00808
boards/nucleo-l433rc: use common rtt configuration
2019-05-21 08:38:43 +02:00
Alexandre Abadie
4e26ac943b
boards/b-l475e-iot01a: use common rtt configuration
2019-05-21 08:38:43 +02:00
Alexandre Abadie
7d12ea78f0
boards/b-l072z-lrwan1: use common rtt configuration
2019-05-21 08:38:43 +02:00
Alexandre Abadie
871dda1216
boards/stm32: introduce common default rtt config
2019-05-21 08:38:43 +02:00
Alexandre Abadie
c439346f6d
Merge pull request #10563 from aabadie/pr/boards/particle_mesh
...
boards/particle-{xenon,argon,boron}: add initial support
2019-05-20 11:54:04 +02:00
Francisco
417f6ca350
Merge pull request #11524 from aabadie/pr/boards/lsn50
...
boards/lsn50: add support for Dragino LSN50 LoRa Sensor Node
2019-05-19 22:24:58 +02:00
Alexandre Abadie
ea2988c057
tests: add lsn50 to insufficient memory boards
2019-05-17 22:43:04 +02:00
Alexandre Abadie
97b4ac0e98
examples: add lsn50 to insufficient memory boards
2019-05-17 22:43:04 +02:00
Alexandre Abadie
14cd77b277
examples/default: add lsn50 to boards providing netif
2019-05-17 22:43:04 +02:00
Alexandre Abadie
bf3e471fdb
boards/lsn50: add initial support
2019-05-17 22:43:04 +02:00
Alexandre Abadie
05409782c0
boards/particle-boron: initial support
2019-05-17 22:42:08 +02:00
Alexandre Abadie
17fd5b7145
boards/particle-argon: initial support
2019-05-17 22:42:08 +02:00
Alexandre Abadie
f524a451a4
boards/particle-xenon: initial support
2019-05-17 22:42:08 +02:00
Alexandre Abadie
22fe1925e0
boards/particle-mesh: common support for particle mesh boards
2019-05-17 22:42:08 +02:00
Francisco
00c652c8b0
Merge pull request #11223 from cladmi/pr/openocd/flashbin/probe
...
tools/openocd.sh: try to probe the board for real flash address
2019-05-17 10:28:58 -07:00
Gaëtan Harter
468e4084f2
tools/openocd.sh: probe the board for real flash address on binary flash
...
Some boards have a configuration of the flash bank with an address of 0
when it actually starts as 0x08000000 but openocd relies on probing
the hardware at runtime.
This now allows to first probe the board to get the actual value.
If probing fail for any reason, return the value from the configuration.
This can happen when the board is unreachable so at least give a valid
output instead of an error.
This will allow correct flash detection on for example the `stm32f3` and
`stm32l4` which have a configured address of 0.
https://github.com/gnu-mcu-eclipse/openocd/blob/4a6f93c96146f3c06e61d89377d76e84915af202/tcl/target/stm32f3x.cfg#L64
https://github.com/gnu-mcu-eclipse/openocd/blob/4a6f93c96146f3c06e61d89377d76e84915af202/tcl/target/stm32l4x.cfg#L51
2019-05-17 18:28:27 +02:00
José Alamos
d66ac85b8d
Merge pull request #11540 from OlegHahm/feature/pkg/openthread_update
...
openthread: update to release 20180926
2019-05-17 14:00:42 +02:00
Semjon Kerner
5c35ea814f
Merge pull request #11273 from haukepetersen/opt_nimble_ver370305a
...
ble/nimble: bump version to 9d4bda2
2019-05-17 11:22:47 +02:00
Hauke Petersen
e172c80bad
tests/nimble_l2cap: adapt to config var name change
2019-05-17 10:34:26 +02:00
Hauke Petersen
5bd53db88f
tests/l2cap: use newly introduced TX_UNSTALLED evt
2019-05-17 10:34:26 +02:00
Hauke Petersen
88f9cf780a
ble/nimble: bump version to 9d4bda2
2019-05-17 10:34:26 +02:00
Leandro Lanzieri
d57f8ff793
Merge pull request #11536 from ParksProjets/pr_ds18
...
drivers/ds18: fix `ds18_read` for negative temperatures
2019-05-17 10:27:51 +02:00
Alexandre Abadie
6187f0483c
Merge pull request #11539 from fjmolinas/pr_xtimer_set_msg_typo
...
sys/xtimer.h: fix typo in xtimer_set_msg
2019-05-17 08:17:33 +02:00
Oleg Hahm
4f83dfd975
openthread: update to release 20180926
2019-05-16 23:28:35 +02:00
fjmolinas
fc7f6c3b68
sys/xtimer.h: fix typo in xtimer_set_msg
2019-05-16 23:17:03 +02:00
Guillaume Gonnet
c9fa1d7503
tests/drivers_ds18: display negative numbers
...
When `ds18_read` returns -2506, DS18 test print `Temperature [ºC]: -25.-6`
whereas it should print `Temperature [ºC]: -25.06. This commit fixes this
issue.
2019-05-16 20:22:02 +02:00
Guillaume Gonnet
1783b3da55
drivers/ds18: fix ds18_read with negative temperatures
...
When DS18 returns 0xFE6F (corresponding to -25.0625 °C), `ds18_read` returns
13877 whereas it should return -2506. This commit fixes this issue.
2019-05-16 20:12:22 +02:00
Kaspar Schleiser
1a3e1590d3
Merge pull request #11531 from kaspar030/static_tests/forbid_PKG_SOURCE_LOCAL
...
tools/pr_check: add check preventing PKG_SOURCE_LOCAL merges
2019-05-16 16:43:06 +02:00
Kaspar Schleiser
30d89b3f62
Merge pull request #11487 from haukepetersen/add_event_waituntil
...
sys/event: add event_wait_until()
2019-05-16 12:59:40 +02:00
Hauke Petersen
8637d308bd
tests: add test for evens_wait_timeout()
2019-05-16 12:01:42 +02:00
Federico Pellegrin